Off‐grid DoA estimation method of wideband signals

In this paper, an off‐grid direction of arrival (DoA) estimation method is proposed for wideband signals. This method is based on the sparse representation (SR) of the array covariance matrix. Similar to the time domain DoA estimation methods, the correlation function of the sources was assumed to be the same and known. A new measurement vector is obtained using the lower‐left triangular elements of the covariance matrix. The DoAs are estimated by quantizing the entire range of continuous angle space into discrete grid points. However, the exact DoAs may be located between two grid points; therefore, this estimation has errors. The accuracy of DoA estimation is improved by the minimization of the difference between the new measurement vector and its estimated values. Simulation results revealed that the proposed method can enhance the DoA estimation accuracy of wideband signals.     

“都林”机器人内板连续式喷涂技术应用浅析

结合新工厂的应用经验,通过对"都林"机器人的喷涂方式、布局、雾化器配置选型、参数设置、仿形设计及品质控制要点等方面的分析,总结了连续式喷涂的优势及技术控制要求。     

基于普吕克直线的多线结构光视觉传感器标定方法

针对多线结构光系统的快速标定,提出了一种基于普吕克直线的标定方法。传统的线结构光标定方法大多以单点的形式进行提取和坐标系转换,从而获得平面方程。然而单点数量较多会导致操作复杂,不适用于多线结构光的标定。为了解决这个问题,提出了一种新的标定方法,该方法在标定过程中全部采用普吕克矩阵的形式,而不是直接使用点特征。该方法有利于在摄像机坐标系下快速准确地获得光平面方程。同时设计了一种与该方法相对应的用于标定多线结构光的平面标定靶标。为了将一般直线转换为普吕克直线,将图像平面维度延展,定义了一个新的图像空间。为了对普吕克直线的坐标系进行转换,重新表达了基于普吕克直线的透视投影模型。基于普吕克空间中直线与平面的性质,对多条结构光线的普吕克矩阵进行合并即可高效地构造出线性的矩阵方程,从而进一步拟合出结构光平面方程。实验验证了所提方法并证明了校准精度的显著提高,当测试距离为1.8 m时,测量得到的三维点的RMS误差在0.08 mm之内。     

Ultrasonic tomographic velocimeter for visualization of axial flow fields in pipes

An ultrasonic tomographic velocimeter to provide quantitative images of axial flow fields in pipes is developed and presented in this work. To detect the flow in various directions and positions, a novel transducer configuration strategy is proposed. All-in-one transducers are mounted in two sectional planes of the pipe. In each plane, N transducers are equally spaced along the circumference. Overlapped propagation paths are introduced by the configuration strategy, and the influence of the vortex flow can be eliminated theoretically by averaging the line velocities of the overlapped paths. To achieve a fast detection speed, the projection data is collected via an electrical scan in a fan-beam mode. After rearrangement and interpolation of the projection data, the parallel beam filtered back projection (FBP) algorithm is implemented to reconstruct the axial flow field. Numerical simulations with the theoretical velocity profiles were performed. The compensation method for the vortex flow is proved to be effective and necessary, and the number of transducers required for reconstruction of common flow profiles was estimated. Accordingly, an ultrasonic tomographic velocimeter consisting of 2×12 transducers was fabricated. Experiments were conducted in the straight pipe and downstream of a single bend pipe and compared with the computational fluid dynamics (CFD) simulation results. As demonstrated, the ultrasonic tomographic velocimeter was capable of visualizing both symmetric and asymmetric axial flow fields with high reliability.     

Decomposition of first-order hybrid Petri nets for hierarchical control of manufacturing systems

Although hybrid Petri net (HPN) is a popular formalism in modelling hybrid production systems, the HPN model of large scale systems gets substantially complicated for analysis and control due to large dimensionality of such systems. To overcome this problem, a typical approach is to decompose the net into subnets and then control the plant through hierarchical or decentralized structures. Although this concept has been widely discussed in the literature for discrete PNs, there is a lack of research for HPNs. In this paper, a new method of decomposition of first-order hybrid Petri nets (FOHPNs) is proposed first and then the hierarchical control of the subnets through a coordinator is introduced. The advantage of using the proposed approach is validated by an existing example. A sugar milling case study is analysed by using a decomposed FOHPN model and the optimization results are compared against the results of the approaches presented in other papers. Simulation results show not only an improvement in production rate, but also show the ability to control the plant online. In addition, by using the hierarchical control structure for an FOHPN model, it is possible to reduce the cost of communication links, improve the reliability of the system, maintain the plant locally, and partially redesign the system.     

Evaluation of system models for an endoscopic fringe projection system

To be able to perform inline inspection of complex geometries, which exhibit for example undercuts or internal structures, a new endoscopic micro fringe projection system has been developed. It is designed to perform areal measurements for tool inspection inside the limited space of metal forming presses by employing flexible image fibers to couple the measurement system’s camera and projector to a compact sensor head. The projector features a laser light source and a digital micro-mirror device to generate high-contrast fringe patterns. To increase the depth of field of the sensor heads, custom gradient-index lenses have been designed as an approximation to the Scheimpflug principle. Challenges arise for both calibration and phase measuring algorithms from the optics, as well as from the reduction in resolution introduced by the fiber bundles. This paper presents an evaluation of two different system models for the endoscopic fringe projection system, which are based on the pinhole camera model and a black box model. An automated calibration process, which gathers the calibration data for two calibration algorithms that are robust to artifacts introduced by the optical path, is demonstrated. Based on a comparison of measurements, differences between the two modeling approaches are discussed. Finally, results of measurements of a demonstrational metal forming tool are shown as an application example.     

A scalable architecture for geometric correction of multi-projector display systems

Multi-projector displays allow the realization of large and immersive projection environments by allowing the tiling of projections from multiple projectors. Such tiled displays require real time geometrical warping of the content that is being projected from each projector. This geometrical warping is a computationally intensive operation and is typically applied using high-end graphics processing units (GPUs) that are able to process a defined number of projector channels. Furthermore, this limits the applicability of such multi-projector display systems only to the content that is being generated using desktop based systems. In this paper we propose a platform independent FPGA based scalable hardware architecture for geometric correction of projected content that allows addition of each projector channel at a fractional increase in logic area. The proposed scheme provides real time correction of HD quality video streams and thus enables the use of this technology for embedded and standalone devices.